OUR PRODUCTS
HORIZONTAL COMPACT CHILLER
CAPACITY RANGE : 0.5TR to 5TR
TEMP RANGE : 10°C to + 25°C
POWER : SINGLE / THREE PHASE
The Weathberg Horizontal Compact Chillers are unique and specially designed for extrusion machines like Pen & Refill Extrusion, Polymer Pencil Extrusion, Profile or Pipe Extrusion and all kind of Plastic Extrusions. The compact and space conscious horizontal design of the chiller enable to install it under the extrusion machine. The close loop refrigeration circuit assures zero water over flow and trouble free operation.
Easy plumbing work, insulation and cable work etc. No additional devices or site work needed for installation and operation.
HORIZONTAL COMPACT CHILLER |
||||||
TECHNICAL SPECIFICATION |
||||||
SR. |
ITEM |
CAPACITY |
POWER CON |
VOLT |
WATER FLOW RATE |
DIMENTION (INCHES) |
NO |
MODEL NO |
TR / KW |
AMPS/W |
LPM |
H X L X D |
|
1 |
FHC500/1PH |
0.50/1512 |
04/880 |
220/50 Hz |
20 |
36 x 22 x 8 |
2 |
FHC1000/1PH |
1.00/3025 |
06/1320 |
220/50 Hz |
35 |
42 x24 x20 |
3 |
FHC1500/1PH |
1.50/4538 |
08/1760 |
220/50 Hz |
45 |
46 x 26 x 20 |
4 |
FHC1500/3PH |
1.50/4538 |
03/1220 |
440/50 Hz |
45 |
46 x 26 x 20 |
5 |
FHC2000/3PH |
2.00/6050 |
04/1650 |
440/50 Hz |
60 |
48 x 26 x 20 |
6 |
FHC3000/3PH |
3.00/9075 |
6/2400 |
440/50 Hz |
90 |
60 x 27 x 20 |
7 |
FHC4000/3PH |
4.00/12100 |
8/3200 |
440/50 Hz |
110 |
62 x 28 x 21 |
8 |
FHC5000/3PH |
5.00/15125 |
10/4000 |
440/50 Hz |
145 |
65 x 28 x 22 |
SALIENT FEATURES
• The Weathberg Horizontal chillers are available from 0.5 to 5 TR with temperature range from +5° to +25°c.
• Equipped with genuine Danfoss \ Copeland \ Tecumseh controls and accessories.
• Equipped with thermally insulated energy efficient hermetically sealed reciprocating or scroll compressor.
• Equipped with copper heat exchanger, assures corrosion proof and trouble free operation.
• Equipped all necessary safety devices like high and low pressure switch, accumulator, expansion valve and Antifreeze.
• Equipped with Microprocessor based digital controller with manual electric control panel with all power controls and components for users friendly operation.
• Available in refrigerant 134A \ 4040A \ 407C \ 507A \ R22.
• Capable to connect multiple machines.
• Available in powder coated sheet metal \ fully stainless steel structure.
• Castor fitted for easy mobility.
- CHILLING PLANT EQUIPPED WITH HERMETICALLY SEALED RECIPROCATING OR SCROLL COMPRESSOR.
- CHILLING PLANT AVAILABLE WITH REFRIGERANTS R22, R134 A, R407C, R404A OR R410A.
- SYSTEMS AVAILABLE IN SHELL & TUBE, PLATE HEAT EXCHANGER OR TUBE & TUBE TYPE EVAPORATOR.
- SYSTEM AVAILABLE WITH AIR-COOLED & WATER COOLED TYPE CONDENSER.
- HIGH QUALITY AXIAL FAN MOTOR WITH LOW NOISE.
- EQUIPPED WITH ALL ELECTRICAL SAFETY DEVICES LIKE COMPRESSOR OVER HEAT PROTECTION, OVER CURRENT PROTECTION, OVER TEMP PROTECTION , PHASE SEQUENCE / PHASE MISSING PROTECTION, ANTIFREEZE PROTECTION.
- EQUIPPED WITH ALL MECHANICAL SAFETY DEVICES LIKE THERMOSTATIC EXPANSION VALVE, SOLENOID VALVE, FILTER DRIERS, LOW / HIGH PRESSURE PROTECTION, WATER FLOW PROTECTION, LOW WATER LEVEL PROTECTION.
NOTE : DUE TO CONTINUOUS SKILL UP-GRADATION AND DEVELOPMENT THE ABOVE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
